Solid position in Japan WADECO microwave detector 
 Japan WADECO company MWS-24TX/24RX microwave solid-bit detector 
 MWS-24TX/24RX 
 Because the microwave penetration with high intensity 
 The microwave level switch can be used effectively to monitor the waste, mineral, powder, granular, asphalt and other 
 Medium Level 
 MWS Series Level Switch is a microwave transmitter and receiver by the composition of the material level switches. 
 Face to face, the transmitter and receiver installed. 
 Transmitter to the receiver microwave transmitter, when the microwave is the object blocking the signal when the receiver output relay. 
 Harsh environmental conditions may lead to the sensor surface becomes dirty or litter and other materials attached to, 
 Because microwave is extremely penetrating, so the sensor will pass easily through the dirt to complete testing 
 Volume. Therefore, it can effectively be used to monitor waste, mineral, powder, granular, asphalt and other media 
 Level. 
 Sensor from dust and surface scarring, and suspended particles of steam 
 Microwave emission angle range, easy to install and adjust, not shocks, reliable operation 
 Can be used for high temperature, high pressure testing of hazardous materials under the hazardous 
 Simple operation to complete the transformation from a variety of measurement 
 Optional 100/200VAC power supply voltage 
 One structure, 24GHz, light weight, easy wiring 


 MWS-DP-2 is a high penetration and the use of microwave multi-Bullock effects of microwave solid flow detector. 
 Sensor probe to a target substance emission microwave signal, microwave part of the probe to determine if they are reflected back in motion or at rest. 
 High penetrating the surface of the microwave probe can bow and by the insulating material of the pipe. 
 MWS-DP-2 microwave solids flow detector is particularly suitable for detecting substances, such as in vacuum tubes in the powder, the particle state of motion. 
 Features: the dust from the sensor probe and attachment of non-conductive material 
 Steam and dust from the impact of air 
 Extended through the use of guided wave components, can be completed on the high temperature, high pressure and the detection of dangerous substances 
 Sensor head must be flush with the wall, can not help but undermine the flow of material 
 Flexible installation 
 110VAC/220VAC voltage selection 
 Easy installation of wiring; weight; the overall design 
 Specifications 
 Model MWS-DP-2 
 Bullock effect measuring principle more 
 Power supply 110VAC/220VAC ± 10% 50HZ 
 Maximum detecting distance of 1.5m (based on measured media may be) 
 Frequency / power 24.2GHZ/5.5mW 
 Control output SPDT 250VAC 3A (COS ￠ = 1) 
 To maintain a time delay - on delay; 0.1-10 seconds (adjustable) 
 To maintain - off delay; 0.1-10 seconds (adjustable) 
 The role of time since the power supply to the normal working time is about 8 seconds 
 Power 5VA 
 Operating temperature -20 ℃ to +70 ℃ 
 Maximum working pressure 5kg/cm2 
 Cast aluminum housing, metal silver, waterproof seal